Roman Pilae?

Post Reply
strandlerper
Posts: 265
Joined: Fri May 06, 2022 7:04 pm
Has thanked: 306 times
Been thanked: 266 times

Again found in the local river a while ago. Obviously incomplete but I did see another one on the far side of the river that had two complete sides. I would say that one measured approx 8-9 inches square. I went back with wellies another day but of course I couldn’t find it again. I kept this because I’d not found anything that shape or size in the river before. Seen plenty of quarry tiles whole or broken. It was its thickness related to its size that puzzled me. It would take quite a few of those to cover a floor? Why not make them bigger? Go on, tell me it’s from a cow shed :lol:
Found fragment of tegula tile in same river and put it up on here a while ago..if I’d not found that I wouldn’t be thinking Roman for these maybe. One side appears smoother than the other which may suggest floor or it could have been the top tile in the stack? Or it might just be wear from being in the river.
Can anyone think what else it might have been used for? :Thinking: Cheers.

I know it’s spelt wrong but it wouldn’t let me spell it right :lol:
You do not have the required permissions to view the files attached to this post.
User avatar
HammeredDeus
Posts: 1848
Joined: Tue Jun 28, 2022 6:01 pm
Location: Sussex
Has thanked: 5180 times
Been thanked: 2451 times

It looks like it's made from sedimentary rock, sandstone maybe, is that local to the area? Could it have been used as ballast in a boat shifting material around the place?
strandlerper
Posts: 265
Joined: Fri May 06, 2022 7:04 pm
Has thanked: 306 times
Been thanked: 266 times

Sand/gritstone are local to the area but I’m pretty sure it’s made from the local clays. Quite a few ‘frogless’ bricks to be found in the river that appear to be made of the same material. The river isn’t wide enough to be navigable anywhere along it’s course. I’ll not give up on finding that other one. Got to be still in there somewhere unless someone’s had it for a plant stand for there garden :lol: :thumbsup: or doing the same as I am….

Be a nice spot for a bathhouse …where two small rivers meet.
User avatar
fred
Posts: 7248
Joined: Mon Feb 28, 2022 5:16 am
Has thanked: 8766 times
Been thanked: 9431 times

The problem for me is that most British Roman bricks are about 1.5 inches high and tend to be quite large. It's Medieval and later ones which push towards 2 inches high and the other dimensions are closer to modern bricks. I think your best bet is to try and find a whole one. :thumbsup:
strandlerper
Posts: 265
Joined: Fri May 06, 2022 7:04 pm
Has thanked: 306 times
Been thanked: 266 times

Cheers Fred thanks for that, I’ll keep looking :thumbsup:
It seemed the right sort of size and thickness for the stacks of tiles used with under floor heating judging from photos of excavated Roman sites I’ve seen.
You do not have the required permissions to view the files attached to this post.
Post Reply