Help with Silver hammered

Post Reply
User avatar
shaggybfc
Posts: 2653
Joined: Sat Jul 18, 2020 8:46 pm
Location: Warwick
Has thanked: 2153 times
Been thanked: 2494 times

Hi all,
I have a new permission, so I've spent a week giving it a going over to see if there are any hot spots. Not found any yet, but have found 3 hammereds in 3 separate fields.
This is the first.
I'm 'hoping' it's an Edward III half groat, but any further information would be great. Approx 21mm diameter.
On followed ploughed land, about 6" deep. Using Deus, hot, sens up to 93, reactivity at 2.5 and audio up to 5
Thanks
Attachments
IMG_4830.JPG
IMG_4829.JPG
Always carefully proof-read what you've typed to see if you've any words out.
Deus with 11" X35 and 9" HF coils. MI 6 pinpointer.
User avatar
Allectus
Posts: 4897
Joined: Sat Jul 18, 2020 9:05 pm
Location: Essex
Has thanked: 229 times
Been thanked: 5277 times

Edward III London Groat or half. Size?

A :thumbsup:
User avatar
shaggybfc
Posts: 2653
Joined: Sat Jul 18, 2020 8:46 pm
Location: Warwick
Has thanked: 2153 times
Been thanked: 2494 times

Cheers Allectus. Approx 21mmish, so thought it would be a half?
Always carefully proof-read what you've typed to see if you've any words out.
Deus with 11" X35 and 9" HF coils. MI 6 pinpointer.
User avatar
Allectus
Posts: 4897
Joined: Sat Jul 18, 2020 9:05 pm
Location: Essex
Has thanked: 229 times
Been thanked: 5277 times

shaggybfc wrote: Thu Jul 23, 2020 9:41 pm Cheers Allectus. Approx 21mmish, so thought it would be a half?
Yep, half it is. :thumbsup:
Post Reply